materials Archives

Article

Rapid Catalyst Screening Using Tandem µ-Reactor GC/MS

This article describes how the Frontier Micro-Furnace Tandem µ-Reactor enables the rapid screening of laboratory-prepared catalysts, specifically carbon fiber reinforced plastic.

On Demand Webinar

Leveraging the Power of FT-NIR Spectroscopy in Polymer Manufacturing

Polymer manufacturing presents inherent challenges for developing analytical methods that can accurately measure both physical and chemical parameters in a fast, non-invasive, and accurate manner with no sample preparation.

Article

Rubber Tire Characterization Using Pyrolysis-GC/MS

This article illustrates the power and simplicity of modern-day pyrolysis-GC/MS in a rubber tire’s material characterization.

PDF: White Paper

XRD and XRF for Your Material Characterization Needs

When it comes to XRD or XRF, how do you decide which technique is the best for your material characterization needs?

PDF: White Paper

Reverse Engineering and Quality Control via FTIR: The Staples of the Modern Analytical Laboratory

Vibrational spectroscopy techniques such as FTIR are versatile instruments that can provide a range of different approaches for reverse engineering analysis in product development.

Article

Brominated Flame Retardants in Waste Plastic Using Thermal Desorption-GC/MS

Many plastic recycling companies seek accurate and reproducible analytical testing for quality control and compliance with regulations.

Article

Forensic Analysis of Fibers Using FTIR Microscopy

FTIR Microscopy enables forensic examiners to identify both detailed visual information and simultaneous material identification when analyzing microscopic fibers.

Article

What are Thermoset Resins?

Fully cured, themoset resins are rigid, typically insoluble solid materials of high mechanical strength and high temperature stability.

PDF: Application Note

Analysis of Thermoset Resins Using Pyrolysis-GC/MS

In this technical note, a thermoset resin’s chemical composition is analyzed using Pyrolysis- GC/MS.

Article

Reverse Engineering of Materials Using FTIR Imaging

Reverse engineering, or deformulation, describes the process of dissembling a particular material and analyzing it.

Article

Material Characterization of Organic Pigments in Industrial Painting Using Pyrolysis

Overcome the challenges of characterizing organic pigments in industrial painting with the Frontier multi-shot pyrolysis solution.

Article

Rapid Screening & Comparison Analysis of Commercial Silicone in 3D Printing Elastomers Using EGA-MS

Silicone is an important elastomeric material used for a variety of applications requiring durability and chemical resistance.

Article

Analyzing Ceramic Composite Materials Using Pyrolysis

Learn how the Frontier Multi-Shot Pyrolyzer can be used for the analysis of ceramic composite materials in the automotive industry.

PDF: eBook

Rubber & Plastic Materials Characterization using Pyrolysis-GC/MS

This eBook offers a compendium of application notes describing the use of Pyrolysis-GC/MS to analyze rubber and plastic components.

On Demand Webinar

Deformulation and Failure Analysis of Polymers using Pyrolysis-GC/MS

Learn how pyrolysis-GC/MS can deliver better efficiency and accuracy in polymer deformulation and failure analysis applications.

PDF: Application Note

Material Characterization of Compounded Rubber Using Double-Shot GC/MS

Identifying the polymers in compounded rubber by way of material characterization using double-shot GC/MS.

PDF: Application Note

Comparison and Failure Analysis of Oil-Based Inks

Subtle differences in polymer formulations are common, but they may not influence the overall performance of the final product.

PDF: Application Note

Analyzing Visual Defects Using FTIR Microspectroscopy

From incoming material verification to defect or contaminant identification, there is always a need to positively identify materials.

On Demand Webinar

5 Secrets of Detailed Polymer Characterization and Deformulation

This webinar explores the five secrets of detailed polymer characterization and deformulation using GC-MS.

On Demand Webinar

Understanding Vehicle Interior Emissions Regulations

Get an introduction to the regulations limiting the quantities of VOCs and SVOCs allowed in vehicle cabin air.

On Demand Webinar

Visual Defect Identification Using FTIR Microspectroscopy

We will explore how to approach visual defect identification using FTIR spectroscopy, and how the technique fits into your visual defect analysis toolkit.

Solutions to complete your workflow

Meet your analytical challenges, with our best-in-class instrumentation.

Application & technical services to maximize your success

Let our team address your analytical challenges by putting our technical services to work for you.

Don’t let support & uptime be an afterthought

Let our service team protect your investment, and ensure you continue to realize value for many years to come.

Search Results

Expand the boundaries of your science.

materials

Article

On Demand Webinar

Article

PDF: White Paper

PDF: White Paper

Article

Article

Article

PDF: Application Note

Article

Article

Article

Article

PDF: eBook

On Demand Webinar

PDF: Application Note

PDF: Application Note

PDF: Application Note

On Demand Webinar

On Demand Webinar

On Demand Webinar

Get the Quantum Analytics advantage

Search

REGISTER FOR LIVE WEBINAR

Rapid Catalyst Screening Using Tandem µ-Reactor GC/MS